Dojran Steel

Wire rod is produced at the Thessaloniki plant, Greece.
The produced grades are:

Wire rod is suitable for a vast range of cold-drawing and covers all the needs of the low-carbon wire products industry.

Chemical composition
Steel grade	C (%) max	Mn (%) max	S (%) max	P (%) max	Si (%) max	Typical uses
SAE 1006	0.08	0.30 – 0.40	0.025	0.020	0.08	Black and galvanized wires, small nails
SAE 1008	0.09	0.30 – 0.50	0.300	0.020	0.10	Black and galvanized wires, nails, galvanized fencing mesh
SAE 1010	0.10	0.40 – 0.60	0.400	0.025	0.15	Concrete reinforcing wire mesh, nails, galvanized fencing mesh
Electrodes	0.09	0.40 – 0.60	0.025	0.020	0.05	Coated welding electrodes (according to DIN 17145 / USD7)
S235JR	0.12	0.40 – 0.65	0.040	0.025	0.20	Concrete reinforcing wire mesh

Diameters, weights and tolerance
Diameter d (mm)	Permissible deviation	Nominal cross-section (cm2)	Nominal weight (kg/m)	Permissible out-of-roundness (mm)
5,5	0,3	0,238	0,187	0,48
6,0		0,283	0,222
6,5		0,332	0,26
7,0	0,4	0,385	0,302	0,64
8,0		0,503	0,395
9,0		0,636	0,499
10,0		0,785	0,617
11,0		0,950	0,746
12,0		1,130	0,888
14,0		1,540	1,21
16,0	0,5	2,010	1,58	4,8